Hp Mu06 Notebook Battery Pinout Configuration

The HP MU06 battery follows a standard 7-pin SMBus configuration where Pins 1,2 = Ground; Pins 6,7 = Positive; Pin 5 = Presence Detect; Pins 3,4 = SMBus Clock/Data. The BMS implements strict safety and lockout features. Unauthorized cell replacement or improper voltage application on the SMBus lines will likely trigger a permanent failure lock. For reverse engineering or repair, always use an isolated SMBus adapter and monitor cell balance before attempting to reset the BMS.

10.8V or 11.1V (depending on cell configuration) Capacity: Typically 47Wh to 55Wh for 6-cell versions Hp Mu06 Notebook Battery Pinout Configuration

SMBus Clock line for communication with the laptop's embedded controller. SMBD (Data) SMBus Data line; often shows ~2.6V on a healthy pack. 5 TEMP / BATT_ID The HP MU06 battery follows a standard 7-pin

The HP MU06 series battery is a common power source found in several modern HP notebook families, including the , HP 15s , HP 250 G8/G9 , and HP Laptop 14s series. For technicians, advanced users, and data recovery specialists, understanding the pinout configuration of this Lithium-Ion (Li-Ion) battery pack is essential for troubleshooting charging issues, performing battery cell replacements, or attempting data recovery without blowing a safety fuse. For reverse engineering or repair, always use an

The leftmost two pins are connected to the negative terminal of the battery pack. SMBus Clock (SCL)

The HP MU06 is a smart lithium-ion battery (typically 3-cell, 41 Wh) used in modern HP consumer laptops. Unlike older batteries with simple positive/negative terminals, the MU06 uses a multi-pin interface for communication, balancing, and safety. Understanding its pinout is critical for: