Xtra Safe Kt 82001 Manual Updated Jun 2026

Tip: Write this code down immediately or save it in a password manager. Lock the Code : Move the internal reset lever back from Position B Position A Test Before Closing

| LED Status | Error Description | Manual Solution (Page 22-24) | | :--- | :--- | :--- | | | Overvoltage (>30V DC) | Reduce voltage immediately. Unit may be damaged. | | "In 1" flashing red | Channel 1 stuck closed | Replace the E-stop button or safety switch. | | "In 2" off, "In 1" on | Mismatched input timing | Inputs must change state within 0.5 seconds of each other. Check wiring symmetry. | | "Out" flashing yellow | Feedback loop broken | Check the auxiliary contacts on your external contactors. | | All LEDs cycle | Internal watchdog fault | Cycle power. If persists, replace the unit (internal CPU error). | Xtra Safe Kt 82001 Manual