Before using the recovery file, you must prepare the hardware correctly to ensure the panel recognizes the bootable media. USB Stick: or lower version (USB 3.0 often fails to boot). The drive must be formatted to Firmware Image:
You cannot simply copy the files to a USB stick. You must write the image "raw" to the device. basic2nd-recovery-system.zip -24 6 mb-
: Insert the USB stick into the powered-off HMI panel, then switch the device on. Before using the recovery file, you must prepare
To use this file, you will need a USB stick (2.0 or smaller) formatted to Prepare the USB Stick : Unpack the contents of Basic2nd_Recovery_System.zip directly into the root directory of the USB stick. Add Image Files : Copy the appropriate HMI device image file ( ) into the directory SIMATIC.HMI\Recovery\ on the USB stick. You must write the image "raw" to the device