The is an over-engineered workhorse. It is not the cheapest 70mm servo, nor is it the most powerful by peak torque alone. What it delivers is reliability in mixed environments (vertical + horizontal) and operational convenience (absolute encoder, no homing).
| Parameter | Value / Range | | :--- | :--- | | | 70mm x 70mm flange (ISO standard) | | Rated Power | 400W – 750W (depending on variant) | | Rated Torque | 1.27 Nm – 2.4 Nm | | Peak Torque | 3.8 Nm – 7.2 Nm | | Rated Speed | 3000 RPM (up to 5000 RPM in "Full" mode) | | Encoder Type | 23-bit absolute multi-turn (standard on "Full") | | Feedback System | BISS-C or Tamagawa protocol | | Insulation Class | F (155°C) | | IP Rating | IP65 (dust-tight & protected against jets of water) | | Brake | 24V DC spring-engaged holding brake (included in "Full") | | Ambient Temp | -10°C to +40°C (non-condensing) | sp furo 70 full
In the world of industrial hardware, "good enough" rarely cuts it. When your operations depend on consistent pressure and high-volume output, you need equipment designed for the long haul. Enter the SP Furo 70 Full The is an over-engineered workhorse
: Equipped with 12 GB RAM and 512 GB of internal storage. | Parameter | Value / Range | |
A: Yes. The brake is separate. If you don't wire the 24V, the brake remains engaged. You must apply voltage to release it. For horizontal axes, you can simply not use the brake wires.