Xycd60 Manual - ((full))

XY-CD60 Solar Battery Charge Controller Module - RoboFactory

Below is a structured outline and key content you can use to build your paper, based on technical specifications found in the XY-CD60 Charging and Discharging Manual xycd60 manual

The module supports two primary working modes, which can be toggled by for 5 seconds: XY-CD60 Solar Battery Charge Controller Module - RoboFactory

| Code | Function | Description | Range/Default | | :--- | :--- | :--- | :--- | | | Heating / Cooling Mode | Sets the relay to activate on temperature drop (Heating) or rise (Cooling). | H (Heating) / C (Cooling) | | P1 | Hysteresis (Dead Band) | The difference between stopping and starting. If set to 2.0°C, the relay activates at Set Temp - 2°C (Heating mode). | 0.1°C – 15.0°C | | P2 | Delay Protection | Prevents rapid cycling of compressor/relay. (e.g., wait 3 minutes before restarting). | 0 – 10 Minutes | | P3 | High Alarm | Audible alarm triggers if temp exceeds this limit. | Off / Temp Value | | P4 | Low Alarm | Audible alarm triggers if temp drops below this limit. | Off / Temp Value | | P5 | Calibration | Corrects sensor reading errors. If actual temp is 25°C and display shows 24°C, set P5 to +1.0. | -5.0°C to +5.0°C | | Off / Temp Value | | P4

The original provides only the absolute basics: battery insertion, on/off, and zero. It fails to explain relative measurement, troubleshooting error codes, hidden calibration modes, or maintenance best practices.

LCD screen showing voltage, percentage (calculated as

The Xycd60 device comes with a range of innovative features and functions. Here are some of the key highlights: